The Edge™ Cutting System gives superior performance
The Edge Cutting System

The Edge Cutting System

The EdgeTM Cutting System has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give the mower superior convenience, performance, and reliability.
  • Deep-deck mower design lifts grass for a clean, even cut
  • Smooth underside of mower prevents grass buildup and evenly disperses grass clippings
  • The rolled outer edge of the deck provides extra strength and protection
  • Dual-stage E-coat and powder paint coatings provide extra protection from rust
42-in. mower deck

42-in. mower deck

The 42-in. two-spindle, three-in-one mower is constructed of 12-gauge (.105-in., 2.7 mm) steel.
  • Requires no tools to go from mulching to side discharge to rear bagging
  • Mulch cover is standard equipment on the LA125 and LA135 Limited Edition Tractors and optional on the LA105 and LA115 Tractors
  • High-performance mulch plug (BM20813) is an optional attachment
 
The mower deck has a rolled lip to provide greater strength and protection.
 
A patented blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.
 
A cut-and-throw 6-1/2 bushel rear bagger is sold separately.
Mower wash port
 
Mower wash port

Mower wash port

Mower wash port with hose connector

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.
  • Hose connector included with mower deck
StarLock™ blade design
 
StarLock blade design

StarLock blade design

StarLock blade design keeps the blade bolt at the correct torque for easy removal.
 
Optional blades for difficult mulching or bagging conditions are available.
Mower deck height adjustment
 
Mower deck height adjustment lever

Mower deck height adjustment lever

Spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height.
  • Increments of 1/4-in. allow the customer to fine-tune the cut height 
  • The standard cut-height memory indicator allows the operator to choose the same cut height each time the grass is cut
 
Last Updated : 25-Sep-2010