7P Utility Cart
7P Utility Cart

7P Utility Cart

  • Cart has a premium molded, high-density polyethylene box construction.
  • Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
  • Polyethylene body will not rust or dent; it stays looking new longer.
  • 3/4-in. x 2-in. stake pockets are molded in to make the addition of side extensions easy.
  • Two vertical 3/4-in. molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
  • Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
  • Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.
17P Cart wheel shown

17P Cart wheel shown

Wheels are mounted on a solid, one-piece axle for durability.
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:
  • Good flotation
  • Minimal rolling resistance
  • Shock absorption
Sloped tailgate
Sloped tailgate for easy emptying (10P Cart shown)

Sloped tailgate for easy emptying (10P Cart shown)

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
Tractor hitch
Spring-pin tractor hitch

Spring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:
  • Fast, easy attachment to the tractor hitch
  • Spring pin to ensure the pin stays in place
Tilt latch
Tilt latch

Tilt latch

An easy-to-use spring-loaded dump latch allows tilting the box for easier unloading. Steep dump angles make emptying the cart easier.

 Box capacity  
Heaped, cu ft (m3) 7 (0.20)
Struck, cu ft (m3) 5.6 (0.16)
Maximum load, lb (kg) 450 (204)*
 Box dimensions  
Width, in. (cm) 33 (84)
Length, in. (cm) 45 (114)
Depth, in. (cm) 10.5 (27)
 Box construction Molded
Material High-density polyethylene (HDPE)**
Tailgate None, sloped
 Pneumatic tires 2 ply
Size 13x4x6
Tread design Turf
Recommended inflation pressure 30 psi
Wheel bearings Iron/Oilite®
Grease fittings on wheels Yes
 Axle diameter, in. (cm) 0.750 (1.905)
Ground clearance, in. (cm) 5.62 (14.3 )
Width, overall, in. (cm) 34 (86.4)
 Hitch pin Pin/spring clip
Dump angles, degrees 55
 Maximum tongue weight, lb (kg) 55 (25)
 Shipping weight with carton, lb (kg) 68 (31)
Net weight, lb (kg) 65 (29)

* Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ mower not to exceed 250 pounds.
** High-density polyethylene is compression molded for optimum thickness in all areas and maximum durability.

Oilite is a U.S.-registered trademark of Beemer Precision Incorporated.

Last Updated : 10-Oct-2011