540-rpm rear power take-off (PTO) drive
540-rpm rear PTO drive

540-rpm rear PTO drive

The dealer-installed 540-rpm rear PTO drive increases the tractor's versatility by providing a means to drive a variety of stationary and 3-point-hitch-mounted power equipment, including rotary tillers, irrigation pumps, salt and sand spreaders, sprayers, and generators.

The male spline shaft is an integral part of the 540-rpm rear PTO drive. Equipment must have a female drive shaft end.

The rear PTO is engaged by the PTO switch on the dash. It utilizes the tractor's internal hydraulic PTO clutch to assure smooth, positive power transfer during engagement.
PTO control lever

PTO control lever

A generator or other stationary attachment can be powered without an operator in the seat by placing the PTO lever in the rear-PTO-only position, setting the tractor's parking brake, and then engaging the PTO.
Tractor compatibility
 
Installation time
 
 
CodeAttachmentDescription
 BM21914

540-rpm rear PTO drive (X400/X500 HDGTs, X700s -June 2010 production)


NOTE:  For use on X400/X500 HDGTs and X700 Series Tractors produced through mid-June 2010. See Sales Manual for tractor serial number break and/or verify that the transmission serial number starts with K02 or K03.

When used on MY2005 and older X400 and X500 HDGTs, also order AM120840 Module.

 BM23588

540-rpm rear PTO drive (X700s beginning with June 2010 production and beyond)


NOTE:  For use on X700 Series Tractors produced after mid-June 2010 when new-pitch gears entered production. See sales manual for tractor serial number break and/or verify that the transmission serial number starts with K00.
 
Last Updated : 24-Apr-2017