17P Cart
17P Utility Cart

17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:
  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
 
Key features for the 17P Utility Cart:
  • 1,000-lb (454-kg), 17-cu ft (0.48-m3) load capacity.
  • Cart has premium molded high-density polyethylene box construction.
  • Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
  • Polyethylene body will not rust or dent, stays new-looking longer.
  • 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
  • Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
  • Ribs in box bottom add strength and prevent shovel from hitting bolts when emptying cart.
  • Sloped tailgate design makes emptying the box easier, no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
  • Wheels are mounted on a solid one-piece axle.
  • Wheels turn on Iron/Oilite® bushings with grease fitting for long life.
  • Spring-loaded dump latch is easy to use.
A convenient foot pedal dump release kit, LP48017, that now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.
Model comparison chart
 
Comparison with similar models
Model Order through Box capacity (heaped) Material thickness Maximum weight  Vehicle compatibility
7P Order Zone™ 7 cu ft (0.20 m3) Polypropylene 450 lb* (204 kg) EZtrak, ZTrak, 100 Series, X300 Series, X500 Series, X700 Series
8Y Order Zone 8 cu ft (0.22 m3) Polypropylene 300 lb* (136 kg) (tow) 100 Series, X300 Series, X500 Series, X700 Series
10P Order Zone 10 cu ft (0.28 m3) Polypropylene 650 lb* (295 kg) EZtrak, ZTrak, 100 Series, X300 Series, X500 Series, X700 Series
13 Order Zone 13 cu ft (0.37 m3) 16-gauge, 0.06-in. (1.5-mm) steel 1,105 lb* (501 kg) X500 Series, X700 Series
17P Order Zone 17 cu ft (0.48 m3) Polypropylene 1,000 lb* (454 kg) 100 Series, X300 Series, X500 Series, X700 Series
18 Order Zone 18 cu ft (0.51 m3) 16-gauge, 0.06-in. (1.5-mm) steel 1,650 lb* (748 kg) X500 Series, X700 Series
21 Order Zone 21 cu ft (0.59 m3) 16-gauge, 0.06-in. (1.5-mm) steel 1,016 lb* (461 kg) X500 Series, X700 Series
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower not to exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/hr).
Specifications
 
 
 

7P

8Y

10P

13

17P

18

21

Box capacity
Heaped 7 cu ft (0.20 m3) 8 cu ft (0.22 m3) 10 cu ft (0.28 m3) 13 cu ft (0.37 m3) 17 cu ft (0.48 m3) 18 cu ft (0.51 m3) 21 cu ft (0.59 m3)
Struck 5.6 cu ft (0.16 m3) 6.6 cu ft (0.19 m3) 8.3 cu ft (0.24 m3) 10 cu ft (0.28 m3) 14 cu ft (0.40 m3) 15 cu ft (0.42 m3) 15 cu ft (0.42 m3)
Maximum load 500 lb* (226 kg) 300 lb* (136 kg) 650 lb* (295 kg) 1,105 lb* (501 kg) 1,000 lb* (454 kg) 1,650 lb* (748 kg) 1,000 lb* (454 kg)
Box dimensions 
Width 33 in. (84 cm) 33.68 in. (85.5 cm) 30.3 in. (77 cm) 30.25 in. (76.8 cm) 39.5 in. (100.3 cm) 38 in. (96.5 cm) 48 in. (122 cm)
Length 45 in. (114 cm) 45 in. (114 cm) 44.5 in. (113 cm) 48 in. (122 cm) 58.5 in. (148.6 cm) 48 in. (122 cm) 48 in. (122 cm)
Depth 10.5 in. (27 cm) 10.75 in. (27.3cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 15.5 in. (39.4 cm) 18 in. (45.7 cm) 11 in. (27.9 cm)
Box construction  Molded Molded Molded Welded Molded Welded Bolted
Material High-density polyethylene (HDPE)** HDPE** w/UV inhibitor  HDPE** 16-gauge, 0.06-in. (1.5-mm) steel  HDPE** 16-gauge, 0.06-in. (1.5-mm) steel 16-gauge, 0.06-in. (1.5-mm) steel
Tailgate None, sloped None, sloped None, sloped Hinged None, sloped Hinged Lift-out/swing-out
Pneumatic tires  2 ply --- 2 ply 2 ply 4 ply 4 ply 2 ply
Size 12x4x6 13x4x6 15x6.00-6 15x6.00-6 16x6.50-8 16x6.50-8 20x10.00-8
Tread design Turf Knobby Turf Turf Turf Turf Turf
Recommended inflation pressure 30 psi (207 kPa) 30 psi (207 kPa) 14 psi (97 kPa) 14 psi (97 kPa) 28 psi (193 kPa) 28 psi (193 kPa) 10 psi (70 kPa)
Wheel bearings Iron/Oilite None Iron/Oilite Iron/Oilite Iron/Oilite Iron/Oilite  Ball bearings, double sealed
Grease fittings on wheels Yes None Yes Yes Yes Yes None
Axle diameter 0.75 in. (1.905 cm) 0.75 in. (1.905 cm) 0.75 in. (1.905 cm) 0.75 in. (1.905 cm) 0.75 in. (1.905 cm) 1 in. (2.54 cm) 1 in. (2.54 cm)
Ground clearance 5.62 in. (14.3 cm) 5.25 in. (13.3 cm) 6.5 in. (16.5 cm) 6.5 in. (16.5 cm) 14.25 in. (36.2 cm) 7 in. (17.8 cm) 8.25 in. (21 cm)
Width, overall 34 in. (86.4 cm) 33.68 in. (85.5 cm) 38 in. (96.5 cm) 38 in. (96.5 cm) 39.5 in. (100.3 cm) 38 in. (96.5 cm) 48 in. (122 cm)
Hitch pin  Pin/spring clip Pin/spring clip Pin/spring clip Pin/spring clip Pin/spring clip Pin/spring clip Pin/spring clip
Dump angles 55 degrees 55 degrees 56 degrees 31 degrees 46 degrees 31 degrees 35 degrees
Maximum tongue weight  100 lb (45.4 kg)  100 lb (45.4 kg)  70 lb (31.75 kg)  100 lb (45.4 kg)  100 lb (45.4 kg)  100 lb (45.4 kg)  100 lb (45.4 kg)
Shipping weight with carton 68 lb (31 kg) 65 lb (29.5 kg) 79 lb (35.8 kg) 110 lb (49.9 kg) 105 lb (47.6 kg) 170 lb (77.1 kg) 240 lb (109 kg)
Net weight 65 lb (29 kg) 55 lb (25 kg) 72 lb (32.7 kg) 105 lb (47.6 kg) 105 lb (47.6 kg) 150 lb (68 kg) 220 lb (99.8 kg)
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower not to exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
 
Utility Carts

Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower not to exceed 250 lb (113 kg). The chart shows which utility carts are compatible with the vehicle.
 
  7P 8Y 10P 13 17P 18 21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z525E, Z535M, Z540M, Z535R, Z540R
X   X        
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170
X  X X   X    
LT150, LT160, LT180, LT190, LTR180 X X X   X    
LX280, LX280AWS, LX289 X X X   X    
X300, X300R, X304, X310, X320, X324, X340, X360
X350, X350R, X354, X370, X380, X384, X390, X394
X X X   X    
SST15, SST16, SST18 X X X        
G110 X X X X X    
GT235, GT245 X X X X X    
GX255, GX335, GX345, GX355 X X X X X    
X500, X520, X530, X534, X540
X570, X580, X584, X590
X X X X X    
X465, X475, X485, X495, X575, X585, X595 X X X X X X X
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
X X X X X X X
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower not to exceed 250 lb (113 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
  
Tractor   
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170
(2) 30-lb (14-kg) wheel weights, front
(2) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180 (2) 34-lb (15-kg) wheel weights, front
(2) 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
(2) 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18 (1) 88-lb (40-kg) weight kit, front
(3) 40-lb (18-kg) weights, rear
G100 (2) 50-lb (23-kg) wheel weights, rear
(2) 42-lb (19-kg) suitcase weights, rear
G110 (2) 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245 (2) 30-lb (14-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, front
(4) 42-lb (19-kg) suitcase weights, rear
(4) 50-lb (23-kg) wheel weights, rear
(2) 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540, X590
(2) 30-lb (14-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, front
(4) 42-lb (19-kg) suitcase weights, rear
(4) 50-lb (23-kg) wheel weights, rear
(2) 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
(4) 40-lb (18-kg) suitcase weights, front
(2) 70-lb (32-kg) wheel cast-iron starter weights, rear
(4) 50-lb (23-kg) cast-iron wheel weights, rear
(2) 50-lb (23-kg) plastic shell wheel weights, rear
(6) 40-lb (18-kg) suitcase weights, rear
 
Ordering information
 
Please contact your local John Deere dealer for availability and pricing information.
 
17P Utility Cart
Order number: LPPCT17JD
 
Oilite is a trademark of Beemer Precision Incorporated.
 
CodeAttachmentDescription
 LPPCT17JD

17P Utility Cart

 
Last Updated : 31-Jul-2017