Hydraulic remote implement latch improves uptime
Two-button activation for hydraulic remote implement latch

Two-button activation for hydraulic remote implement latch

The hydraulic remote implement latch allows implements to be changed quickly and efficiently.  An operator can activate the device from the cab by simultaneously pressing the two buttons installed on the right-hand side of the operator’s station. Switching from one attachment to the next can now be accomplished quickly with limited movements of the loader and without leaving the operator’s seat.
 
The hydraulic remote implement latch is powered by a hydraulic accumulator, which collects and stores excess oil generated through the normal operation of the boom (curl, dump, lift, lower). To activate the device, the two switches installed in the right-hand side of the operator’s station are pressed simultaneously by the operator. This action releases the oil, and unlocks the implement.
 
This feature does not require a third-function hydraulic system.
 
CodeAttachmentDescription
9909 

Carrier unlatch
For use with 600R, 620R, 640R, 660R, and 680R Loaders. Does not require three-function hydraulics.


NOTE: Requires code 9908 Loader/Tractor wiring harness prep package.
NOTE: Compatible with 6R and 6M Tractors with a 600R, 620R, 640R, 660R, or 680R Loader.
 BW17038

Hydraulic remote implement latch
For use with 600R and 620R Loaders. Does not require three-function hydraulics.


NOTE: Requires code 9908 Loader/Tractor wiring harness prep package.
NOTE: Compatible with 6R and 6M Tractors with a 620R Loader.
 BW16945

Hydraulic remote implement latch
For use with 640R, 660R, and 680R Loaders. Does not require three-function hydraulics.


NOTE: Requires code 9908 Loader/Tractor wiring harness prep package.
NOTE: Compatible with 6R and 6M Tractors with a 640R, 660R, or 680R Loader.
 
Last Updated : 04-Sep-2019