|
|
 | Category 2 3-point hitch on 5E Tractor |
|
| The center link on the 5E Series 3-point hitch can be positioned in one of three holes to more accurately set the implement position and draft sensing.
Lift links can be adjusted for lateral float to allow implements with gauge wheels or skids to follow the ground contour. The right lift link adjusts without tools for added convenience when leveling implements. Sway chains are adjustable to adapt to a wide variety of implements.
An adjustable depth stop provides consistency when lowering the hitch. Each time the position control lever is pushed forward, it stops where the depth stop has been positioned—a value to any operator who desires a consistent, level ground when preparing a seedbed.
| | |
| Hitch adjustments can be made quickly and easily |
| |
 | Draft link with Category 2 hitch balls |
Flat-bar, non-adjustable draft links feature Category 2 hitch balls. Change between Category 2 and Category 1 implements by simply adding lower link and center link bushings (available through Parts).
The 3-point hitch has plenty of lift capacity to handle heavy implements: 2810 lb at 24 in. behind the hitch balls.
| | |
| Optional telescoping draft links |
| |
To make the task of attaching implements even easier, optional telescoping draft links can be ordered as a field-installed kit.
| | |
 |
| Optional Equipment On : |
5045E, 5055E, 5065E, 5075E |
|
| |
| Last Updated : 07-May-2010 |
