Optional iMatch™ Quick-Hitch allows for easy implement hookup
iMatch Quick-Hitch

iMatch Quick-Hitch

iMatch Quick-Hitch with rotary cutter hookup

iMatch Quick-Hitch with rotary cutter hookup

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
 
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.
 
NOTE: In the above picture with the rotary cutter, the bushing set BW15056 is shown. These bushings allow the hooks on the iMatch and the pins on the rotary cutter to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
  • Upper bushing
    • Inside diameter: 0.76 to 0.77 in.
    • Outside diameter: 1.24 to 1.25 in.
  • Lower bushings
    • Inside diameter: 0.88 to 0.89
    • Outside diameter: 1.43 to 1.44
iMatch Quick-Hitch dimensions
 
iMatch dimensions

iMatch dimensions

iMatch Quick-Hitch implement geometry
 
iMatch implement dimensions

iMatch implement dimensions

 
Last Updated : 04-Mar-2011