GreenStar™ 3 CommandCenter™ display
GreenStar 3 CommandCenter

GreenStar 3 CommandCenter

The GreenStar 3 (GS3) CommandCenter is the central information system used on 7R, 8R and 8RT, 9R and 9RT Series Tractors and is located on the end of the CommandARM™, or on the RH Console (stationary) for some 7R Series Tractors (depending on transmission option). When the operator swivels the seat, the GS3 CommandCenter will follow, allowing tractor information to be readily available.  The GS3 CommandCenter also allows the operator to program various settings and tailor the readings to a specific operation.
 
The 178-mm (7-in.) color display is divided into three regions: left-hand, center, and right-hand.
 
The left-hand region can be configured by the operator to monitor three tractor functions of their choice.  The right-hand region shows the shortcut keys to desired information.  Operators can program additional shortcut keys that will appear in the right-hand region.  The center region either shows the main home pages or displays the information relative to the current settings the operator is adjusting.

CommandCenter settings tutorials Click to play video
CommandCenter display regions

CommandCenter display regions



1 Left-hand region
2 Center region
3 Right-hand region
 
Tractor readings that are displayed within the GS3 CommandCenter:
  • Fuel use per hour
  • Fuel use per area covered
  • Distance traveled
  • Area covered or traveled
  • Hydraulic oil temperature
  • FieldCruise™ settings
  • Clock
  • Engine hours
  • Hours since last service
  • Ground speed (wheel input)
  • Actual ground speed (radar or GPS input)
  • Slip percentage
  • Engine rpms
  • Engine coolant temperature
  • Engine oil pressure
  • System voltage
  • Auto shift set gear (depending on transmission option)
  • Power take-off (PTO) speed
  • Area covered per hour
  • iTEC™
  • Hydraulic settings and ambient air temperature (with deluxe or premium cab options)
  • Ambient air temperature (with deluxe or premium cab options unless cab has Right Hand Console controls)
 
NOTE: For percent slip and hitch slip command to function, an optional radar sensor is required.
 
The GS3 CommandCenter also allows the operator to change or adjust other general machine functions, such as:
  • Day/night display backlight
  • Front and Rear PTO engage modulation rate to start implements
  • Performance monitor recording (implement in operation input selection, i.e. implement switch, selective control valve, or hitch)
  • Hitch slip command response (sensitivity)
  • U.S. or metric units
  • Display language
  • Transmission Settings
  • Service intervals
  • Diagnostic codes
AMS capabilities
 
GreenStar™ 3 Display

GreenStar™ 3 Display

The GS3 CommandCenter display has the capability to run certain AMS applications. With a StarFire receiver, the display can be utilized for manual guidance. In addition, operators can utilize AutoTrac™ and Swath Control Pro™ within the GS3 CommandCenter by purchasing the appropriate activation when ordering the tractor or through AMS after delivery.
Seeding capabilities
 
The GS3 CommandCenter display has the capability to run SeedStar™, SeedStar 2, and SeedStar XP.
Layout Manager
 
Layout manager

Layout manager

Home page scrolling

Home page scrolling

The GS3 CommandCenter features layout manager. Layout manager allows operators to configure GS3 CommandCenter home pages in the format they desire, displaying the information that is essential to them. Layout manager also allows operators to page through other screens by simply selecting the home page icon.
 
Access manager
 
An additional feature that is now in the GS3 CommandCenter display is access manager.
Access manager

Access manager

Access manager allows the owner to lock out certain function settings from the operator to prevent them from accessing or changing settings through an owner define four digit code.
Lock-out screen

Lock-out screen

 Items that owners can select to lock out include:
  • GreenStar applications
  • Hitch
  • Hydraulic
  • Transmission
  • PTO
  • FieldCruise™
  • Display
  • Performance monitor
Video capability
 
GS3 CommandCenter video

GS3 CommandCenter video

Video triggers

Video triggers

The touchscreen GS3 CommandCenter is prewired with one video input to provide video capability. Operators can set the video to a mirror on/off. Mirror on will flip the view right for left, and mirror off will show left for right. 
 
The operator has the ability to set a variety of triggers, including reverse, PTO, hitch, and SCV levers to activate the camera. In addition, the amount of time that video is activated can be set from the GS3 CommandCenter from 5 seconds to 60 seconds.
 
Camera (video observation system) is available through JD Parts and Agricultural and Industrial (A & I) Products:
 
JD Parts -
  • SWVCCS150B: Voyager camera with mounting bracket
  • SWTY26834: Adapter harness (will plug into the harness located on the back of the tractor behind the cab; under the back window)
  • CEC15:  15-ft extension harness
  • CEC50:  50-ft extension harness
A & I -
  • A-VS1C110: CabCAM camera
  • GS3C: Adapter harness (will plug into the harness located on the back of the tractor behind the cab; under the back window)
  • A-PVC20: 20-ft extension harness
  • A-PVC65: 65-ft extension harness
Display options
 
Touch-screen option

Touch-screen option

The CommandCenter is available in two configurations: standard display and an optional touch-screen display.


Codes

Description

1821

GS3 CommandCenter 7-in. display

NOTE: Includes access manager user lock-out software.
Display is capable of manual guidance with StarFire™ receiver.
Display is capable of AutoTrac and Swath Control Pro with activations and software sold separately.
Display is Pivot Pro capable
.

1823

Touch-screen GS3 CommandCenter 7-in. display, video capable

NOTE: Includes access manager user lock-out software.
Display is capable of manual guidance with StarFire receiver.
Display is capable of AutoTrac and Swath Control Pro with activations and software sold separately.
One video input pre-wired in cab. See Parts for cameras.
 

1825

GS3 CommandCenter 7-in. display with GS3 2630 Display

NOTE: Includes access manager user lock-out software.
Display is capable of manual guidance with StarFire receiver.
Display is capable of AutoTrac and Swath Control Pro with activations and software sold separately.
Does not include cornerpost display bracket.
 

1826

Touch-screen GS3 CommandCenter 7-in. display, video capable with GS3 2630 Display

NOTE: Includes access manager user lock-out software.
Display is capable of manual guidance with StarFire receiver.
Display is capable of AutoTrac and Swath Control Pro with activations and software sold separately.
One video input pre-wired in cab. See Parts for cameras.
Does not include cornerpost display bracket.

 
Last Updated : 25-Jul-2013