Auxiliary hydraulic couplers for motor return, sump, and power beyond
Easy hookup of planters and other implements
 
Auxiliary hydraulic couplers (8R shown)

Auxiliary hydraulic couplers (8R shown)

Auxiliary hydraulic couplers (8R shown)

Auxiliary hydraulic couplers (8R shown)

  1. Pressure port
  2. Return ports
  3. Case drain port
  4. Load sense coupler
  5. Hitch valve
  6. Auxiliary hitch valve port (if equipped)
 
To assist hooking up large equipment where multiple connections are required, factory-installed auxiliary hydraulic couplers are available.
Auxiliary sump coupler
 
The sump coupler kit allows oil to return from the hydraulics motor at low pressures. This coupler is required for correct attachment to current-production seeding products with case drain lines. The connector in the sump port is not to be used to carry return flow from a function to the tractor.
Hydraulic motor return couplers
 
The hydraulic motor return couplers can be used as couplers for return oil flow, from hydraulic orbital motors and other devices to the tractor's low-pressure return port, labeled R on the tractor.
 
Use of this connector specifically in the return to sump port position is for hydraulic components that require a leak-off line connection to the tractor. Components and implements that require this typically are larger orbital motors that require a drain for seal protection. The connector in the sump port is not to be used to carry return flow from a function to the tractor.
Power beyond couplers
 
Power beyond provides live hydraulic power to equipment. This kit supplies oil pressure to implements when the engine is running.
 
Any implement using power beyond must have a way to control oil flow. Use an independent control valve that is pressure-and-flow compensating (supplied separately) to control the oil flow rate from this coupler set. Power-beyond functions require a load-sense signal to regulate pump pressure, therefore, a load-sense hydraulic line is used. Certain equipment may require modification.
Optional auxiliary hydraulic equipment (9R shown)

Optional auxiliary hydraulic equipment (9R shown)

The auxiliary hydraulic optional equipment includes the following:

A – Pressure coupler
B – Load sense coupler
C – Return coupler (motor return)

 
CodeAttachmentDescription
832G 

Auxiliary hydraulic connections – 12.7 mm (0.5-in.)


NOTE: Includes two 12.7-mm (0.5-in). motor return couplers, one 9.5-mm (0.38-in.) flat-face sump coupler, one 12.7-mm (0.5-in.) power beyond pressure coupler, and one 6.4-mm (0.25-in.) load sense coupler.
832H 

Includes two 12.7-mm (0.5-in). motor return couplers, one 9.5-mm (0.38-in.) flat-face sump coupler, one 12.7-mm (0.5-in.) power beyond pressure coupler, and one 6.- mm (0.25-in.) load sense coupler


NOTE: Includes two 19-mm (0.75-in.) motor return couplers, one 9.5-mm (0.38-in.) flat-face sump coupler, one 19-mm (0.75-in.) power beyond pressure coupler, and one 9.5-mm (0.38-in.) load sense coupler.
9153 

Discontinued - Auxiliary hydraulic couplers (wheel tractors only)


NOTE: No longer available.

 

If field installing this option code, kit part numbers for power beyond, motor return, and flush-face sump connectors for wheel and track tractors are available.

832FRE299261

Motor seal drain kit


NOTE: No longer available as option code 832F.

 

Required with all rear hitch codes 4050, 4051, 4052, and 4053.

 

Available on all 9R and 9RT Series Tractors.

 BRE10089

Includes two 12.7-mm (0.5-in.) couplers for motor return couplers, one flat-face sump coupler, one power beyond pressure coupler, and one 6.4-mm (0.25-in.) coupler for load sense coupler.

 

Suitable for use with most planting and seeding equipment. 


NOTE: Compatible with all model year 2011 and newer 7R and 8R Series Wheel Tractors.
 RE344102

Includes two 12.7-mm (0.5-in.) motor return couplers, one 9.5 mm (0.38-in.) flat-face sump coupler, one 12.7-mm (0.5-in.) power beyond pressure coupler and one 6.4-mm (0.25-in.) load sense coupler


NOTE: Compatible with all model year 2011 and newer 8RT Series Track Tractors.
 BRE10135

Includes two 19-mm (0.75-in.) motor return couplers, one 9.5-mm (0.38-in.) flat-face sump coupler, one 19-mm (0.75-in.) power beyond pressure coupler and one 9.5-mm (0.38-in.) load sense coupler.


NOTE: Compatible with all model year 2011 and newer 8RT Series Track Tractors.
 BRE10090

Includes two 19-mm (0.75-in.) motor return couplers, one 9.5-mm (0.38-in.) flat-face sump coupler, one 19-mm (0.75-in.) power beyond pressure coupler and one 9.5-mm (0.38-in.) load sense coupler.


NOTE: Compatible with all model year 2011 and newer 7R and 8R Series Wheel Tractors.
 BRE10072

Hydraulic motor return kit without case drain, without three-in-one hitch, 12.7 mm (0.5 in.)


NOTE: For case drain, order case drain kit separately, RE327561.

 

Compatible with model year 2011 and newer 7R and model year 2020 7R (with updated cab).

 BRE10073

Hydraulic motor return kit without case drain, without three-in-one hitch, 19 mm (0.75 in.)


NOTE: For case drain, order case drain kit separately, RE327561.

 

Compatible with model year 2011 and newer 7R and model year 2020 7R (with updated cab).

 BRE10074

Hydraulic motor return kit without case drain, with three-in-one hitch, 19 mm (0.75 in.)


NOTE: For case drain, order case drain kit separately, RE327561.

 

Compatible with model year 2011 and newer 7R and model year 2020 7R (with updated cab).

 AR114664

Hydraulic motor return/sump couplers


NOTE: This coupler is for use with hydraulic motor returns or motor drain/sump returns.

 

Compatible with 8000, 9000, 8010, 8020, 8030, 8R, and model year 2011 8RT Series Tractors.

 RE151894

Hydraulic motor return/sump couplers


NOTE: This coupler is for use with hydraulic motor returns or motor drain/sump returns.

 

Compatible with 8010, 8020, 8030, 8RT, 9020, and 9030 Series Track Tractors.

 RE300467

Power beyond couplers - for use on tractors with or without hydraulic trailer brake option.


NOTE: Compatible with model year 2011 and newer 7R and model year 2020 7R (with updated cab).
 RE281166

Power beyond couplers - for use on tractors with or without hydraulic trailer brake option


NOTE: Kit includes load sense, pressure, and return couplers.


Compatible with 8030 Series Wheel Tractors (serial number 040000) and above, 8030 Series Track Tractors (serial number 905000) and above, and 8R Series Wheel Tractors.

 RE301658

Power beyond couplers - for use on tractors with or without hydraulic trailer brake option


NOTE: Kit includes load sense, pressure and return couplers.


Compatible with 8RT Series Track Tractors only.

 RE231706

Power beyond couplers - for use on tractors with or without hydraulic trailer brake option


NOTE: Kit includes load sense, pressure and return couplers.


Compatible with 8030 Series Wheel Tractors (serial number 039999) and below and 8030 Series Track Tractors (serial number 904999) and below.

8030 Series Track Tractors require two adapters (RE151934).

 RE299261

Motor seal drain kit


NOTE: To assist hooking up to large planters, seeders, and harvesting equipment where multiple connections are required, factory-installed auxiliary hydraulic couplers on wheel tractors are available.
 
Last Updated : 26-Dec-2021