Three-bag, 14-bu (493-L) Power Flow™ system for X700
Three-bag Power Flow material collection system (MCS)

Three-bag Power Flow material collection system (MCS)

Click-N-Go brackets

Click-N-Go brackets

The 14-bu (493-L), three-bag Power Flow MCS increases the versatility of X700 Series Tractors equipped with a 48-in. (122-cm) Accel Deep™ (48A) Mower Deck; 48-in. (122-cm)*, 54-in. (137-cm), or 62-in. (157-cm) Convertible or Edge™ Xtra Mower; the 54-in. (137-cm) or the 60-in. (152-cm) High Capacity (HC) Mower or the 60-in. (152-cm) 7-Iron™ Mower. The large, 14-bu (493-L) capacity means the operator can collect a large area of grass or leaves before needing to stop to empty the bags.

The three-bag hopper installs to the tractor with the Click-N-Go™ mounting system:
  • Click-N-Go brackets must be ordered separately. 
Front ballast is recommended to counterbalance the rear bagger:
  • Install two 42-lb (19.1-kg) suitcase weights on front of machine.
*NOTE: The three-bag, 14-bu (493-L) Power Flow is not compatible with a X729, X739, or X749 Tractor equipped with a 48X Mower Deck because the chute can contact the rear tire in a turn. However, it is compatible with the 48 Accel Deep (48A) Mower because the increased deck height and the height of its Power Flow blower housing lift the chute high enough to clear the wheel and fender with the three-bag hopper installed.
 
CodeAttachmentDescription
 BM20671

Three-bag, 14-bu (493-L) hopper assembly


NOTE:  Requires Power Flow blower assembly and Power Flow chute. Also requires BM20714, Click-N-Go brackets to install the hopper, if not already installed on the tractor. Front ballast is recommended for bagging, especially on hills or inclines. Not for LX or Select Series™ X300 Tractors.
 
Last Updated : 19-Oct-2022