185-mm (7.25-in.) and 230-mm (9-in.) blade spacing available for 2630 Disk
The 2630 General-Purpose Disk comes equipped with front and rear solid-spherical disk blades with 185-mm (7.25-in.) or 230-mm (9-in.) spacing. The primary blade size is 560 mm (22 in.) x 4.5 mm (0.177 in.)

Available blade options for the 2630 are listed below.
185-mm (7.25-in.) blade spacing

185-mm (7.25-in.) blade spacing

230-mm (9-in.) blade spacing

230-mm (9-in.) blade spacing

185-mm (7.25-in.) spacing, front and rear
  • Ideal for seedbed preparation and chemical incorporation
  • Provides limited residue-handling capability
  • Works best in light to medium soils
230-mm (9-in.) spacing, front and rear
  • Good for seedbed preparation and chemical incorporation in medium to heavy soils
  • Works well in primary tillage in light to medium soils
  • Provides good residue-handling capability
NOTE:
  • The number 1 edge has a beefier profile and is best for rocky conditions.
  • The number 10 edge has a narrower profile and should work well in most non-rock conditions.
  • Rear main and wing gangs are tapered with one blade 51 mm (2 in.) smaller than the primary blade.
  • Integral furrow filler blades are included with all rear wing gangs which are 102 mm (4 in.) smaller than the primary blade.
  • Front outer gangs have a taper that is 51 mm (2 in.) smaller than the primary blade, except for 559-mm (22-in.) disk blades.
Number 1 edge (outside bevel, outside grind)

Number 1 edge (outside bevel, outside grind)

Number 10 edge (inside bevel, outside grind)

Number 10 edge (inside bevel, outside grind)

  1. Bevel
  2. Grind
 
3310 

230-mm (9-in.) spacing, solid-spherical disk blade
Primary blade size is 560 mm (22 in.) x 4.5 mm (0.177 in.)

560-mm x 4.5-mm (22-in. x 0.177-in.) solid sphere number 10 edge front
560-mm x 4.5-mm (22-in. x 0.177-in.) solid sphere number 10 edge rear
230-mm (9-in.) spacing front
230-mm (9-in.) spacing rear


: Compatible with 2630 Disk, front and rear
Included in base equipment
3311 

230-mm (9-in.) spacing, solid-spherical disk blade
Primary blade size is 610 mm (24 in.) x 5 mm (0.197 in.)

610-mm x 5-mm (24-in. x 0.197-in.) solid sphere number 10 edge front
610-mm x 5-mm (24-in. x 0.197-in.) solid sphere number 10 edge rear
230-mm (9-in.) spacing front
230-mm (9-in.) spacing rear


: Compatible with 2630 Disk, front and rear
3312 

185-mm (7.25-in.) spacing, solid-spherical disk blade
Primary blade size is 560 mm (22 in.) x 4.5 mm (0.177 in.)

560-mm x 4.5-mm (22-in. x 0.177-in.) solid sphere number 10 edge front
560-mm x 4.5-mm (22-in. x 0.177-in.) solid sphere number 10 edge rear
185-mm (7.25-in.) spacing front
185-mm (7.25-in.) spacing rear


: Compatible with most 2630 Disks, front and rear; not compatible on base codes: 04L2N, 04L7N, 04L9N, and 04LAN
 
: 31-Jan-2019