230-mm (9-in.) blade spacing available for 2633 Disk
The 2633 Dual-Purpose Disk comes equipped with front solid- or cutout-spherical blades and rear solid spherical disk blades with 230-mm (9-in.) spacing. The base blade size is 610 mm x 5 mm (24 in. x 0.197 in.).
 
Available blade options for the 2633 are listed below.
230-mm (9-in.) blade spacing

230-mm (9-in.) blade spacing

230-mm (9-in.) spacing, front and rear
  • Good for seedbed preparation and chemical incorporation in medium to heavy soils
  • Works well in primary tillage in light to medium soils
  • Provides good residue-handling capability
NOTE:
  • The number 1 edge has a beefier profile and is best for rocky conditions.
  • The number 10 edge has a narrower profile and should work well in most non-rock conditions.
  • Rear main and wing gangs are tapered with one blade 51 mm (2 in.) smaller than the primary blade.
  • Integral furrow filler blades are included with all rear wing gangs which are 102 mm (4 in.) smaller than the primary blade.
  • Front outer gangs have a taper that is 51 mm (2 in.) smaller than the primary blade, except for 560-mm (22-in.) disk blades.
  • The John Deere 2633 offers producers a rollable blade option. Rollable disk blades support the edge-rolling practices that are commonly used. These blades can be rolled to restore the edge sharpness for customers needing a better penetrating blade.
  • The special boron-composite material is capable of enduring the edge-rolling techniques without jeopardizing blade edge durability and longevity. John Deere does not recommend rolling disk blades that do not have this rollable designation.
Number 1 edge (outside bevel, outside grind)

Number 1 edge (outside bevel, outside grind)

Number 10 edge (inside bevel, outside grind)

Number 10 edge (inside bevel, outside grind)

  1. Bevel
  2. Grind
 
CodeAttachmentDescription
3311 

230-mm (9-in.) spacing, solid-spherical disk blade
Primary blade size is 610 mm x 5 mm (24 in. x 0.197 in.)

610-mm x 5-mm (24-in. x 0.197-in.) solid sphere number 10 edge front
610-mm x 5-mm (24-in. x 0.197-in.) solid sphere number 10 edge rear
230-mm (9-in.) spacing front
230-mm (9-in.) spacing rear


NOTE: Compatible with 2633 Disk, front and rear
Included in base equipment
3313 

230-mm (9-in.) spacing, solid-spherical disk blade
Primary blade size is 610 mm x 6.5 mm (24 in. x 0.256 in.)

610-mm x 6.5-mm (24-in. x 0.256-in.) solid sphere number 1 edge front
610-mm x 6.5-mm (24-in. x 0.256-in.) solid sphere number 1 edge rear
230-mm (9-in.) spacing front
230-mm (9-in.) spacing rear


NOTE: Compatible with 2633 Disk, front and rear
3360 

230-mm (9-in.) spacing, front cutout-spherical disk blade
230-mm (9-in.) spacing, rear solid-spherical disk blade
Primary blade size is 610 mm x 6.5 mm (24 in. x 0.256 in.)

610-mm x 6.5-mm (24-in. x 0.256-in.) cutout sphere number 10 edge front
610-mm x 6.5-mm (24-in. x 0.256-in.) solid sphere number 1 edge rear
230-mm (9-in.) spacing front
230-mm (9-in.) spacing rear


NOTE: Compatible with 2633 Disk
3314 

230-mm (9-in.) spacing, solid-spherical rollable disk blade
Primary blade size is 610 mm x 6.5 mm (24 in. x 0.256 in.)

610-mm x 6.5-mm (24-in. x 0.256-in.) solid sphere rollable blades front
610-mm x 6.5-mm (24-in. x 0.256-in.) solid sphere rollable blades rear
230-mm (9-in.) spacing front
230-mm (9-in.) spacing rear


NOTE: Compatible with 2633 Disk, front and rear
3315 

230-mm (9-in.) spacing, solid-spherical disk blade
Primary blade size is 660 mm x 6.5 mm (26 in. x 0.256 in.)

660-mm x 6.5-mm (26-in. x 0.256-in.) solid sphere number 1 edge front
660-mm x 6.5-mm (26-in. x 0.256-in.) solid sphere number 1 edge rear
230-mm (9-in.) spacing front
230-mm (9-in.) spacing rear


NOTE:  Compatible with 2633 Disk, front and rear
 
Last Updated : 24-Oct-2018