|
|
|
|
| Low rate |
| |
 | Low-rate meter roller |
The yellow, low-rate meter roller is for rates from 0.91 up to 9.07 kg/ha (2 up to 20 lb/acre) for seeds such as flax, canola, and alfalfa. The low-rate meter roller rotates more continuously, minimizing pulsing effect for better metering at low rates. There are 20 flutes on this meter roller. Each flute is 8-mm (0.31-in.) wide at the top, 2-mm (0.08-in.) wide at the bottom, and 1.5-mm (0.06-in.) deep.
| | |
| Medium rate |
| |
 | Medium-rate meter roller |
The black medium-rate meter roller is for rates from 9.07 up to 59 kg/ha (20 up to 130 lb/acre) for seeds such as wheat, barley, canola, and small soybeans up to 6.35 mm (0.25 in.) in diameter. It is also used for medium rates of fertilizer. This is the most commonly used meter roller. There are 10 flutes on this roller, which are 18.5-mm (0.73-in.) wide at the top of the flute, 12-mm (0.47-in.) at the bottom of the flute, and 8-mm (0.31-in.) deep.
| | |
| High rate |
| |
 | High-rate meter roller |
The green, high-rate meter roller is for rates from 30 up to 99.8 kg/ha (220 lb/acre), such as high rates of fertilizer and large soybeans bigger than 6.35 mm (0.25 in.) in diameter. There are 10 flutes, which are deeper and wider. Each flute is 21.5-mm (0.85 in.) wide at the top of the flute, 8-mm (0.31-in.) wide at the bottom of the flute, and 14-mm (0.55-in.) deep.
| | |
| Very high rate |
| |
 | Very high-rate meter roller |
This blue roller is for rates from 22.7-120.2 kg/ha (50-265 lb/acre), or seeds such as barley and oats with beards. It is also used for large seeds such as garbanzo beans (in non SectionCommand™ system applications) or very high fertilizer rates. There are six flutes, which are very deep and widely spaced.
| | |
| Large-seed roller for SectionCommand control system |
| |
 | Large seed meter roller |
|
|
- For use with large seeds only (6 mm [0.25 in.] in diameter or larger)
- For use with SectionCommand only
- Is not for use with fertilizers or cereal grains
- Preserves seed quality of large seeds when used with SectionCommand
| | |
|
|
 | Primary reduction kit |
| | |
| Open or close product runs – C850 Air Cart |
| |
NOTE: The following procedure aligns the air cart meter with the seeding tool.
Part identification:
A. Hose clamp
B. Meter cover
C. Cap, 76.2 mm (3 in.) ID
D. Meter seal
NOTE: When metering high rates through a seeding tool with three to four secondary manifolds, it may be necessary to either add secondary manifolds or slow down to achieve a very high target rate.
| | |
| |
| Code | Attachment | Description |
| 9500 | BA29094 | Non SectionCommand low-rate meter roller (yellow) |
| 9501 | BA29095 | Non SectionCommand medium-rate meter roller (black) |
| 9502 | BA29096 | Non SectionCommand high-rate meter roller (green) |
| 9503 | BA29097 | Non SectionCommand very high-rate meter roller (blue) |
| 9510 | BA32675 | SectionCommand low-rate meter roller (yellow) |
| 9511 | BA32677 | SectionCommand medium-rate meter roller (black) |
| 9512 | BA32679 | SectionCommand high-rate meter roller (green) |
| 9513 | BA32681 | SectionCommand very high-rate meter roller (blue) |
| 9514 | BA32683 | SectionCommand large-seed meter roller (orange) |
| 9530 | BA32812 | Air cart primary reduction kit – 6.35 cm (2.5 in.) |
| 9531 | BA33115 | Air cart primary reduction kit – 7.6 cm (3 in.) |
| 4701 | | Regular Rate (black) |
| 4702 | | Low Rate (yellow) |
| 4703 | | High Rate (green) |
| 4704 | | Very High Rate (blue) |
| 2301 | | Low Rate (yellow) |
| 2311 | | Low Rate (yellow) |
| 2302 | | High Rate (green) |
| 2312 | | High Rate (green) |
| 2303 | | Very High Rate (blue) |
| 2313 | | Very High Rate (blue) |
| 2314 | | Large Seed (orange) |
|
| |
| Last Updated : 30-Jul-2020 |
| | |
|
| |
