SectionCommand™ system field conversion kit
SectionCommand is available as an attachment for field conversion (AFC) for all hydraulic drive carts. See SectionCommand saves seed and fertilizer input costs for more information on benefits and workings of the system.
SectionCommand components on 1910 Cart with meter cartridge removed

SectionCommand components on 1910 Cart with meter cartridge removed

SectionCommand on 1910 Air Cart

SectionCommand on 1910 Air Cart

There are four main components needed to add SectionCommand onto 1910 hydraulic drive air carts:
 
1. SectionCommand AFC kit (listed in the table below, order one kit per meter), kit includes:
  • SectionCommand valve block and meter housing components
  • Gate detection controller
  • Electronic power module (EPM)
  • Associated harnessing, hardware, and brackets
2. Hydraulic hoses - Dealer is responsible for fabricating and sourcing hoses.
 
3. SectionCommand meter cartridges will be needed for each meter. These meter cartridges contain gates, gate detection sensors, and a secondary meter lock-down. See Meter cartridges for field conversion for more information.
 
4. New Operator’s Manual including SectionCommand. Order A98462 or newer 1910 operator’s manual when installing onto a model year 2013 19,400-L (550-bu) cart or all model year 2014 carts.
 
Ensure the latest version of software is installed on both cart controller and in-cab display.
 
All SectionCommand kits are sold in eight-run configurations. If pairing the cart with a tool of seven runs or less, order one - BA32812 meter run reduction kit per cart. This kit contains parts to block off runs not used when pairing a cart with a tool of seven runs or less.
 
NOTE: For SectionCommand to operate properly, it must be installed on each meter. 
 
 
CodeAttachmentDescription
 BA32805

SectionCommand valve block and associated parts. Order one kit per meter (example: 19,400-L [550-bu] cart requires three kits, while 9515-L [270-bu] cart requires two kits).

 

Fits model year 2014 carts (serial numbers: A81910H755000 – A81910H759999).

 

Fits model year 2013 19,400-L (550-bu) carts (serial numbers: A81910H750527 - A81910H750845 and A81910H748102 - A81910H748108).

 

For model year 2013 19,400-L (550-bu) carts it is recommended to order and install per meter:
1 – AA82874 valve
1 - AT175334 filter/strainer
1 - T77613 O-ring
1 - R26448 O-ring


NOTE:  When installing SectionCommand, download and install latest version of software onto cart controller and display.
 BA32692

SectionCommand valve block and associated parts. Order one kit per meter (example: 19,400-L [550-bu] cart requires three kits and 9515-L [270-bu] cart requires two kits).

 

Fits model year 2015 and newer carts (serial numbers: A81910H760000– ).


NOTE:  When installing SectionCommand, download and install latest version of software onto cart controller and display.
 BA32812

Meter run reduction kit.

 

For pairing cart with tools of four to seven runs. Order one per cart when pairing with tools less than eight runs. Contains:

  • Foam seals to block air flow on bottom side of meter
  • Caps to block product flow on top of cartridge
  • Caps and hose clamps to block air flow through primary runs

NOTE:  SectionCommand is not available as an AFC for mechanical drive carts. Mechanical drive carts cannot be outfitted with hydraulic drive.
 
Last Updated : 07-Jun-2022