Cab accessory mounting solutions
NOTE: The information below is intended to show a more complete portfolio of options available for this area of the machine. Check the table below to verify specific model and configuration compatibility.
Click to play video
Headliner mounting rail
R558980 mounting rail (shown with additional accessories for monitor and tablet)

R558980 mounting rail (shown with additional accessories for monitor and tablet)

The Premium and Ultimate Comfort and Convenience package includes an accessory and monitor rail in the headliner near the right-side window. This rail can be installed as an accessory on the standard cab to expand options for mounting accessories and unique implement monitors.
 
  • Compatible with AXE59372 (clamp-style mount) and BRE10482 and BRE10483 (T-slot ball mounts).
 
Right-side window mounting bracket and rail
BRE10574 assembly with steel bracket (A) and mounting rail (B)

BRE10574 assembly with steel bracket (A) and mounting rail (B)

A large steel bracket, which spans the entire right-side window, mounts directly to the cab frame for rigidity and strength. The headliner mounting rail (included in this kit) is bolted to the steel bracket. This solution enables the operator to configure and reconfigure monitors and accessories without changing mounting solutions from either location. This rail accommodates clamp-style and T-slot style mount solutions (purchased separately).
 
  • Spans the entire right-side window.
  • Uses the same factory headliner mounting rail part number (R558980) for easy reconfiguring of accessories.
  • Aluminum mounting rail mounts to either the top or underside of the steel bracket, allowing even more options and maximizing visibility preferences.
  • Compatible with AXE59372 (clamp-style mount) and BRE10482 and BRE10483 (T-slot ball mounts).
 
Short vertical mounting rail
BRE10464 short vertical rail (mounted in right front upper A-post)

BRE10464 short vertical rail (mounted in right front upper A-post)

Short vertical rail (mounted in right lower rear C-post)

Short vertical rail (mounted in right lower rear C-post)

Short vertical rail (mounted in left rear C-post)

Short vertical rail (mounted in left rear C-post)

A shorter, 260-mm (10.25-in.) aluminum mounting rail is available. The kit includes all the hardware needed to mount in up to five vertical locations, including upper and lower right-side A-post rollover protective structure (ROPS), upper right-side C-post ROPS, and upper left rear C-post ROPS. It is compatible with both clamp-style and t-slotted ball mounts (purchased separately).
 
  • Up to five vertical locations supported with this one rail (kit contains one rail and mounting hardware).
  • Uses the same factory headliner mounting rail shape for ease of operator adjustment and preferences.
  • Works in combination with other accessory bracket solutions.
  • Compatible with AXE59372 (clamp-style mount) and BRE10482 and BRE10483 (T-slot ball mounts).
 
Harness management hook
R562310 harness routing hook (shown mounted to headliner rail R558980 and using retention features of the C-post)

R562310 harness routing hook (shown mounted to headliner rail R558980 and using retention features of the C-post)

Harness routing hook

Harness routing hook

Keep accessory and monitor wiring neatly contained with these moveable harness hooks. These hooks are specifically designed to easily snap into the factory headliner rail and BRE10574 window mounting bracket and rail with no tools and can be moved as needed. These hooks allow accessory wiring to routed together for a clean look and maximized visibility.
 
CommandARM™ console bracket
BRE10501 CommandARM bracket

BRE10501 CommandARM bracket

This unique bracket connects to the right side of the CommandARM. It is compatible with the cell phone mount (BRE10015), tablet mount (BRE10255), and more. It is also compatible with the touchscreen radio relocation kit (BXX11045) for Premium and Ultimate Comfort and Convenience packages.
 
Mounting solution for GreenStar™ display monitors
GreenStar 3 2630 Display shown

GreenStar 3 2630 Display shown

Use the tables below to find all the parts needed to connect GreenStar displays physically and electronically.
 
For GreenStar 2 CommandCenter 2600/GreenStar 3 2630 Displays:
Mounting style
Display mount (ball)
Tie-rod assembly
Rail mount (ball)
Clamp
PF11019 plus two 19M8648
RE574454
AXE59372
10-mm (0.4-in.) threaded
PF11019 plus two 19M8648
PF80459
RE576490
 
Single location bracket
RE558242
The clamp-style mount with GreenStar monitor is not recommended with the vertical rail (BRE10464).
 
NOTE: Also order power harness (PF90686) and Ethernet cable (PFP12950). Optional protective film for screen (PF90596) is also available.
 
For 4240 /4640 Universal Display and Extended Monitor:
Mounting style
Display mount (ball)
Tie-rod assembly
Rail mount (ball)
Clamp

AL212683 plus four 19M8648

AXE59372
10-mm (0.4-in.) threaded
UC17356 plus four 19M8648
PF80459
RE576490
 
Single location bracket
RE558242
The clamp-style mount with GreenStar monitor is not recommended with the vertical rail (BRE10464).
 
NOTE: Also order power harness (PFP12435) and Ethernet cable (RE573617). Optional protective film for screen (PF90596) is also available.
 
Mounting solution for BaleTrak™ Pro monitor-controller
BaleTrak Pro monitor

BaleTrak Pro monitor

Use the table below to find all the parts needed for the BaleTrak Pro monitor-controller assembly (AFH210762) used on 450E, 450M, 550M, 460M, and 560M Round Balers.
Mounting style
Display mount (ball)
Tie-rod assembly
Rail mount (ball)
Clamp
RAP-379U-M616*
RE574454
AXE59372
10-mm (0.4-in.) threaded
RAP-379U-M616*
PF80459
RE576490
 
Original assembly
Requires RE343680 mounting bracket
*Not available from John Deere; reference the supplier part number provided. Part is necessary where listed. Discard the tightening knob from AFH210762 and replace with this 6-mm (0.25-in.) ball stud. The tie-rod assembly and rail mount options will then connect.
 
A clamp-style mount with BaleTrak Pro is not recommended with the vertical rail (BRE10464).
 
NOTE: Also order power harness (AFH214146), which connects to the cab at up to six locations.
 
Complete kit productivity mounts
BRE10255 tablet mount assembly (1), BRE10015 cell phone mount assembly (2), and RE343680 L-shaped mounting bracket (3)

BRE10255 tablet mount assembly (1), BRE10015 cell phone mount assembly (2), and RE343680 L-shaped mounting bracket (3)

BRE10152 self-leveling cup holder assembly

BRE10152 self-leveling cup holder assembly

BXE10606 locking suction mount cell phone assembly

BXE10606 locking suction mount cell phone assembly

BXE10607 locking suction mount tablet assembly

BXE10607 locking suction mount tablet assembly

BRE10255 tablet mount assembly

BRE10255 tablet mount assembly

BXE10864 tablet mount assembly

BXE10864 tablet mount assembly

Mounting a tablet, cell phone, or beverage can be easily done with these solutions. These strong and simple-to-use solutions keep all important items right where they are wanted.
 
Build-your-own mounting solution
AL212683 tie-rod assembly with mounting plates

AL212683 tie-rod assembly with mounting plates

PF80459 117.6-mm (4.63-in.) tie-rod assembly

PF80459 117.6-mm (4.63-in.) tie-rod assembly

PF80460 38.1-mm (1.5-in.) ball mount on U-bolt

PF80460 38.1-mm (1.5-in.) ball mount on U-bolt

RE574454 76.2-mm (3-in.) tie-rod assembly with 38.1-mm (1.5-in.) ball on round mounting plate

RE574454 76.2-mm (3-in.) tie-rod assembly with 38.1-mm (1.5-in.) ball on round mounting plate

UC17356 38.1-mm (1.5-in.) ball mount on universal square

UC17356 38.1-mm (1.5-in.) ball mount on universal square

RE558821 25.4-mm (1-in.) ball mount on 10-mm (0.4-in.) stud

RE558821 25.4-mm (1-in.) ball mount on 10-mm (0.4-in.) stud

AXE59372 clamp-style accessory mounting bracket

AXE59372 clamp-style accessory mounting bracket

BRE10482 25.4-mm (1-in.) T-slot ball mount assembly (left) and BRE10483 38.1-mm (1.5-in.) T-slot ball mount assembly

BRE10482 25.4-mm (1-in.) T-slot ball mount assembly (left) and BRE10483 38.1-mm (1.5-in.) T-slot ball mount assembly

There are a variety of additional mounting part solutions available through John Deere to resolve unique mounting configuration needs. The table below includes several additional parts (not shown above) to aid in many different mounting needs.
Code
Part Number
Description
 
R558980
Headliner mounting rail
 
Adds a mounting solution to the Select cab package in the headliner at the right side of the operator. This is the same feature included with Premium and Ultimate cab packages.
 
NOTE: Compatible with model year 2020 and newer 7R and 8R/8RT/8RX (with updated cab) and model year 2022 and newer 9R/9RT/9RX Tractors.
NOTE: Compatible with AXE59372, BRE10482, BRE10483, and R562310.
NOTE: Also order three 19M7061 mounting screws.

 
BRE10574
Right-side window mounting bracket and rail
 
Spans the entire length of the right-side window connecting to the A-post and C-post of the ROPS.
NOTE: Compatible with model year 2020 and newer 7R and 8R/8RT/8RX (with updated cab) and model year 2022 and newer 9R/9RT/9RX Tractor.
NOTE: Compatible with AXE59372, BRE10482, BRE10483, and R562310.

 
 
BRE10464
Short vertical mounting rail
 
One 260-mm (10.25-in.) bracket which mounts in up to five different ROPS locations: top and bottom of right A-post, top and mid position of right C-post, or top of left C-post.
 
NOTE: : Compatible with 7x20, 7x30, 7R, 8x20, 8x30, 8x30T, 8R, 8RT, 9x20, 9x30, 9R, 9RT, 9RX, model year 2020 and newer 7R and 8R/8RT/8RX (with updated cab), and model year 2022 and newer 9R/9RT/9RX Tractors.
NOTE: Compatible with BRE10574.
NOTE: R562310 harness routing hooks may require additional support to stay in vertical position.

 
R562310
Harness routing hook
 
Keeps accessory harnesses held in place for an organized cab.
 
NOTE: Compatible with BRE10574, BRE10464, and R558980.
 
BRE10501
CommandARM bracket
 
Mounts to the outer right side of the CommandARM.
 
NOTE: Compatible with model year 2020 and newer 7R and 8R/8RT/8RX (with updated cab) and model year 2022 and newer 9R/9RT/9RX Tractors.
NOTE: Compatible with BRE10255, BRE10015, BRE10152, RE558821, RE576490, and BXX11045.
NOTE: See installation instructions (R570166).
 
RE343680
L-shaped steel mounting bracket
 
Mounts in up to five different locations in the model year 2020 7R/8R/8RT/8RX Tractors.
 
NOTE: Not compatible with AXE59372, BRE10482, or BRE10483.
NOTE: Can be used in combination with BRE10574 or BRE10464.
NOTE: Compatible with BRE10255, BRE10015, BRE10152, RE558821, RE576490, and BRE10574.
NOTE: Compatible with 7x20, 7x30, 7R, 8x20, 8x30, 8x30T, 8R, 8RT, 9x20, 9x30, 9R, 9RT, 9RX, model year 2020 and newer 7R and 8R/8RT/8RX (with updated cab), and model year 2022 and newer 9R/9RT/9RX Tractors.
 
AXE59372
Clamp-style accessory mounting bracket
 
Clamps to the rounded outer edge of mounting rail BRE10574, BRE10464, and R558980.
 
NOTE: Compatible with AL212683 and RE574454.
 
AL212683
Tie-rod assembly with mounting plates
 
Includes 63.5-mm (2.5-in.) tie-rod assembly, 38.1-mm (1.5-in.) ball mount (UC17356), and 38.1-mm (1.5-in.) ball mount.
 
NOTE: Compatible with AXE59372, 4240/4640 Universal Display, and Extended Monitor.
 
BRE10482
25.4-mm (1-in.) T-slot ball mount assembly
 
NOTE: Compatible with BRE10574, BRE10464, RE561251, RE558819, model year 2020 and newer 7R and 8R/8RT/8RX, and model year 2022 and newer 9R/9RT/9RX headliner rail.
NOTE: Compatible with BRE10015 and BRE10152.
 
BRE10483
38.1-mm (1.5-in.) T-slot ball mount assembly
 
NOTE: Compatible with BRE10574, BRE10464, and R558980.
NOTE: Compatible with BRE10255, RE574454, and PF80459.
NOTE: Do not exceed supporting more than 1.8 kg (4 lb) in light applications or 1.3 kg (3 lb) in heavy-duty applications.
 
RE558821
 
25.4-mm (1-in.) ball mount on 10-mm (0.4-in.) stud
 
NOTE: Compatible with mounting holes in tractor cab ROPS after removing plastic cover plugs.
NOTE: Compatible with BRE10501, RE343680, RE561251, and RE558819.
 
RE576490
 
38.1-mm (1.5-in.) ball mount on 10-mm (0.4-in.) stud
 
NOTE: Compatible with mounting holes in tractor cab ROPS after removing plastic cover plugs.
NOTE: Compatible with BRE10501, RE343680, RE574454, and PF80459.
 
PF11019
 
38.1-mm (1.5-in.) ball mount for GreenStar 2 or GreenStar 3 display
 
NOTE: Compatible with GreenStar 2 1800 or 2600 and GreenStar 3 2630.
NOTE: Compatible with RE574454 and PF80459.
 
UC17356
38.1-mm (1.5-in.) ball mount on universal square
 
NOTE: Compatible with 4240/4640 Universal Display and Extended Monitor.
NOTE: Compatible with RE574454 and PF80459,
NOTE: Four mounting holes are 6.4 mm (0.25 in.) in diameter and spaced at 75 mm (2.95 in.) center-to-center in each corner with two additional slotted holes in the center of the bracket.
 
RE558822
 
Cell phone retainer with 25.4-mm (1-in.) ball mount
 
Securely holds 44-mm (1.75-in.) to 114-mm (4.5-in.) wide cell phone with adjustable spring-loaded rubber posts.
 
NOTE: Compatible with RE561251 and RE558819.
 
BRE10015
Cell phone mount assembly
 
Securely holds 44-mm (1.75-in.) to 114-mm (4.5-in.) wide cell phone with adjustable spring-loaded rubber posts.
 
NOTE: Compatible with 10-mm (0.4-in.) mounting bosses.
NOTE: Compatible with BRE10482 and RE343680.
 
BXE10606
 
Locking suction mount cell phone assembly
 
A perfect solution for operators who move to multiple machines, need to reference information, or make calls while doing repairs. Single suction mount securely holds 44-mm (1.75-in.) to 114-mm (4.5-in.) wide cell phones with adjustable spring-loaded rubber posts.
 
NOTE: Compatible with glass, painted surfaces, and gelcoat fiberglass. Requires smooth, non-porous, and flat or slightly curved surface.
 
BRE10152
Self-leveling cup holder assembly
 
NOTE: Compatible with 10-mm (0.4-in.) mounting bosses.
NOTE: Compatible with BRE10482, RE343680, and BRE10015.
 
BRE10255
Tablet mount assembly
 
Securely holds 177-mm (7-in.) to 254-mm (10-in.) tablets in a spring-loaded tray.
 
NOTE: Compatible with 10-mm (0.4-in.) mounting bosses.
NOTE: Compatible with BRE10483 and RE343680.
NOTE: Tray design may interfere with some tablet features.
 
RE561252
 
Tablet retainer
 
Securely holds 177-mm (7-in.) to 254-mm (10-in.) wide tablets in a spring-loaded tray.
 
NOTE: Tray design may interfere with some tablet features.
 
BXE10479
Tablet mount assembly
 
Securely holds 177-mm (7-in.) to 254-mm (10-in.) wide tablets with adjustable spring-loaded rubber posts.
 
NOTE: Compatible with 10-mm (0.4-in.) mounting bosses.
NOTE: Compatible with BRE10483 and RE343680.
 
BXE10607
Locking suction mount tablet assembly
 
A perfect solution for operators who move to multiple machines, need to reference information, or video share while doing repairs. Double-suction mount securely holds 177-mm (7-in.) to 254-mm (10-in.) wide tablets with adjustable spring-loaded rubber posts.
 
NOTE: Compatible with glass, painted surfaces, and gelcoat fiberglass. Requires smooth, non-porous, and flat or slightly curved surface.
 
AXE44192
 
Tablet retainer
 
Securely holds 177-mm (7-in.) to 254-mm (10-in.) wide tablets with adjustable spring-loaded rubber posts.
 
BXE10864
Tablet mount assembly
 
Securely holds 279.4-mm (11-in.) to 305-mm (12-in.) wide tablets with adjustable spring-loaded rubber posts. Includes tablet retainer, tie-rod assembly, and clamp-style mount.
 
NOTE: Compatible with BRE10574, BRE10464, and R558980.
 
RE558819
 
76.2-mm (3-in.) tie-rod assembly
 
NOTE: Compatible with 25.4-mm (1-in.) ball mounts.
 
PF80459
 
117.6-mm (4.63-in.) tie-rod assembly
 
NOTE: Compatible with 38.1-mm (1.5-in.) ball mounts.
 
RE561251
133.35-mm (5.25-in.) tie-rod assembly
 
NOTE: Compatible with 25.4-mm (1-in.) ball mounts.
 
RE574454
76.2-mm (3-in.) tie-rod assembly with 38.1-mm (1.5-in.) ball on round mounting plate
 
NOTE: Compatible with 38.1-mm (1.5-in.) ball mounts and clamp AXE59372.
NOTE: Includes both tie-rod assembly and one 38.1-mm (1.5-in.) ball mount round plate.
NOTE: Ball mount round plate includes seven holes with a maximum center-to-center distance of 48.5 mm (1.91 in.).
 
R540530
 
25.4-mm (1-in.) ball on diamond mount
NOTE: Compatible with RE561251 and RE558819.
NOTE: Two mounting holes are 6 mm (0.25 in.) in diameter and spaced at 48 mm (1.9 in.) center-to-center.
 
PF80460
38.1-mm (1.5-in.) ball mount on U-bolt (12.7-mm to 25.4-mm [1/2-in. to 1-in.] tube)
 
NOTE: Compatible with RE574454 and PF80459.
NOTE: Compatible with 12.7-mm (0.5-in.) up to 25.4-mm (1-in.) diameter pipe.
 
PFP19197
38.1-mm (1.5-in.) ball mount on U-bolt (19-mm to 31.75-mm [3/4-in. to 1.25-in.] tube)
 
NOTE: Compatible with RE574454 and PF80459.
NOTE: Compatible with 1- mm (0.75-in.) up to 31.75-mm (1.25-in.) diameter pipe.
 
RE558242
GreenStar display module mounting parts, cornerpost bracket
 
Supports Gen 4 4640 Universal Displays along with GreenStar 3 2630 and older displays.
NOTE: Compatible with 7R, 8R, 8RT, 9R, 9RT, 9RX, model year 2020 and newer 7R and 8R/8RT/8RX, and model year 2022 and newer 9R/9RT/9RX Tractors.
NOTE: Works with A-post and C-post ROPS mounting locations only.
 
RE343685
Replacement knob for tie-rod assembly
 
NOTE: Compatible with most tie-rods.
 
 
Last Updated : 23-Feb-2022